• Hyflex HZ-30G stucco/grout pump unit with tow package
• (2) 50' sections of 1 1/2" diamter 800 psi grout hose
• (1) 10' sections of 1 1/4" wand hose
• assortment of used wands
• 125' remote cable with on/off pump switch
• replacement rotor ($500 value)
• (3) sections of used air hose
• Assortment of maintenance tools including 36" pipe wrench for rotor/stator replacement
• Assortment of spare parts including love-joy couplers, cam-lock hose couplers, nozzles and rubber hose washers

This pump is ready to go and has been maintained well. All parts are easily replaceable and available at local auto supply stores, small engine stores, or Grainger.

Hyflex Corporation fabricated this pump for Odisea and has supplied unlimited support over the phone and by fax whenever it has been needed. They supply replacement stators and rotors and will ship overnight to any location. Their service cannot be beat! When you need help, you talk to the person (Allen) who designs and manufactures all of their pumps.

This machine is an indistrial strength pump, using a stator/rotor combination found on larger Tommy Gun models at a much higher price. It has a hopper that holds a full 9 c.f. mixer full and the hopper is low so the mixer only needs to be 18" off the ground. No running around with whellbarrows!

The unit is fully self-contained and powered by a 13 hp Honda gas engine. It includes a tow package so it can be hauled anywhere behind a vehicle with a 2" trailer hitch. There is an onboard 12 cfm Emglo air pump with a regulator to supply the air at the wand. All parts are serviceable and easily replaced.

The pump is powered by a hydraulic system that has needed no maintenance other than the addition of fluid. The hydraulic system is equivalent to systems found on Caterpillar tractors. Hyflex makes well-built products and backs them up with world-class service.

This pump setup without the tools and replacement parts listed above was originally $13,000 in 2003. We are asking $8,500 for everything, or make an offer.